Delay
delay · v1Adds delayed repeats using the built-in Delay controls. The parameters below come from the native registry.
Delay
Inputs
Outputs
Select a port to see its purpose and an example connection. Its reference row will highlight.
Ports and connections
| Port / ID | Type | Connection |
|---|---|---|
Audioin | audio | Audio: audio input for Delay. A source connection is required.Required |
TimetimeMs | number | Controls Time with a number stream. Without a wire, the manual value is 375 ms.Manual value when disconnected |
Local tempobpm | number | Controls Local tempo with a number stream. Without a wire, the manual value is 120 BPM.Manual value when disconnected |
Feedbackfeedback | number | Controls Feedback with a number stream. Without a wire, the manual value is 35 %.Manual value when disconnected |
Dry / Wetmix | number | Controls Dry / Wet with a number stream. Without a wire, the manual value is 25 %.Manual value when disconnected |
Outputoutput | number | Controls Output with a number stream. Without a wire, the manual value is 0 dB.Manual value when disconnected |
AmountcharacterAmount | number | Controls Amount with a number stream. Without a wire, the manual value is 50 %.Manual value when disconnected |
Low CutlowCut | number | Controls Low Cut with a number stream. Without a wire, the manual value is 20 Hz.Manual value when disconnected |
High CuthighCut | number | Controls High Cut with a number stream. Without a wire, the manual value is 20000 Hz.Manual value when disconnected |
DepthmodDepth | number | Controls Depth with a number stream. Without a wire, the manual value is 0 %.Manual value when disconnected |
RatemodRate | number | Controls Rate with a number stream. Without a wire, the manual value is 0.3 Hz.Manual value when disconnected |
Outputout | audio | The audio result of Delay, available to other nodes on every sample.Output |
An output can feed multiple inputs of the same type. An input has one source; Function also requires matching signatures. All connection rules →
Parameters
Values describe manual settings. A connected stream replaces a parameter’s manual value; disconnecting restores it.
| Parameter | Range | Default | Control |
|---|---|---|---|
Time sourcetimeMode | 0…20: Host · 1: BPM · 2: ms | 0 | StaticLinear scale |
TimetimeMs | 1…8000 ms | 375 ms | Input or manualLogarithmic scale |
Divisiondivision | 0…220: 1/64 · 1: 1/64 D · 2: 1/64 T · 3: 1/32 · 4: 1/32 D · 5: 1/32 T · 6: 1/16 · 7: 1/16 D · 8: 1/16 T · 9: 1/8 · 10: 1/8 D · 11: 1/8 T · 12: 1/4 · 13: 1/4 D · 14: 1/4 T · 15: 1/2 · 16: 1/2 D · 17: 1/2 T · 18: 1/1 · 19: 1/1 D · 20: 1/1 T · 21: 1 bar · 22: 2 bars | 10 | StaticLinear scale |
Local tempobpm | 30…300 BPM | 120 BPM | Input or manualLinear scale |
Routingmode | 0…10: Stereo · 1: Ping Pong | 0 | StaticLinear scale |
Feedbackfeedback | 0…95 % | 35 % | Input or manualLinear scale |
Dry / Wetmix | 0…100 % | 25 % | Input or manualLinear scale |
Outputoutput | -18…18 dB | 0 dB | Input or manualLinear scale |
Charactercharacter | 0…60: Clean · 1: Telephone · 2: Radio · 3: FM · 4: Tape · 5: Drive · 6: Lo-Fi | 0 | StaticLinear scale |
AmountcharacterAmount | 0…100 % | 50 % | Input or manualLinear scale |
Low CutlowCut | 20…20000 Hz | 20 Hz | Input or manualLogarithmic scale |
High CuthighCut | 20…20000 Hz | 20000 Hz | Input or manualLogarithmic scale |
DepthmodDepth | 0…100 % | 0 % | Input or manualLinear scale |
RatemodRate | 0.1…10 Hz | 0.3 Hz | Input or manualLogarithmic scale |
How to use it
Input → Delay → Output. Connect Interface or an LFO to an available Number input to control a parameter.
Things to check
Only parameters with matching inputs can be modulated. Switches and structural settings remain manual.
Check required inputs and matching types. Run Compile before auditioning; a validation failure preserves the previous working module. Troubleshooting →